How to use the high viscosity rotor pump correctly?


Time:

2023-07-28

High viscosity rotor pump is a new type of volumetric pump developed according to the needs of petroleum, chemical, paint, grease, medicine, dyestuff, food and other industries, because the product can be used in different materials and its structure, so it is widely used in the transmission of different properties, different viscosity of the medium. High viscosity rotor pumps if the occasional occurrence of insufficient flushing fluid or interruption of the phenomenon, the check valve will automatically close. The friction ring then carries the load of the fluid at the media end, thus cutting off the sealed medium into the sealing cavity, so it can provide protection for the seal.

High viscosity rotor pump is a new type of volumetric pump developed according to the needs of petroleum, chemical, paint, grease, medicine, dyestuff, food and other industries, because the product can be used in different materials and its structure, so it is widely used in the transmission of different properties, different viscosity of the medium. High viscosity rotor pumps if the occasional occurrence of insufficient flushing fluid or interruption of the phenomenon, the check valve will automatically close. The friction ring then carries the load of the fluid at the media end, thus cutting off the sealed medium into the sealing cavity, so it can provide protection for the seal.
1, high viscosity rotor pump using the specified voltage, line voltage does not exceed the pumping pump nameplate on the specified voltage plus or minus one-tenth can be used.
2、High viscosity rotor pump is connected to the motor after opening the box, and tightly connected to the motor, so that the pump body and the motor as a whole, connected to the water wheel pipe.
3、High viscosity rotor pump can be used only after checking the appearance of each part before use.